i have lowered my t400 and wondered if the side stand from a same year trident or sprint would fit rather than adjust my original one.
I've searched other sites but haven't found anything about using another side stand. Those models don't use the same assemblies as the Tiger, but I can't imagine the actual pivot size would be different. Others with Tigers and T300's may know or ne able to measure.
thanks for feed back. I will track down a trident or sprint and get my micrometer out.cheers
Gday Haydenvn,
I have always thought the standard stand was too short and made the bike lean too far. It measures approx 310mm.
A couple of years ago, I lowered my '93 by flipping the chain adjuster (there is more on this here somewhere, I think) and lowering the front triple clamps about 40mm. In my opinion this made the standard stand just about perfect! Bonus!
I also have a '92 Trophy. Sidestand measures approx 260mm. At a guess, I imagine the Trophy stand would be too short for even a lowered Tiger. It also has a smaller "foot".
Perhaps it is worth trialling your original stand, before ditching it. I also don't know how far you have lowered your Tiger, so my thoughts may well be unhelpful.
Regards, Bern. :occasion14
again thanks for the info. I fitted the new 40nmm drop dog bones yestersay and will adjust the forks to suit but so far the side stand is ok. In fact the angle of the bike with the side stand down is now better.
Quote from: haydenvn on October 01, 2023, 04:25:19 PMagain thanks for the info. I fitted the new 40nmm drop dog bones yestersay and will adjust the forks to suit but so far the side stand is ok. In fact the angle of the bike with the side stand down is now better.
Good info, glad it worked out. Did you also rotate the concentric adjusters on the rear wheel? Just curious for future reference what the total drop would be using both lowering links and rotation of the adjusters.
no .not rotated rear wheel spindle as ride height now ok. h