Hi, I've got a 98 885 tiger. I'm looking for a lowercrankcase. Any wrecks or burned up motors with good cases out there? What happened to mine is were the oil filter thru bolt attaches to the case it has cracked out all the way around the threaded boss. The only causes I can think of would be overtorqueing. It was very tight when I got the bike. Or a rock hit the head of the bolt causing a sudden shock that might crack it. I have had the bike offroad in very rocky terrain. To any one else I'd recommend always using a torque wrench when changing the filter,and a full skid plate that extends all the way back if you plan on doing any offroad riding with this bike. Has anyone ever heard of this happening before? I wonder about the overtorque theory as I would think the threads would strip first. Any ideas on a fix or parts would be greatly appreciated. Thanks.
Ouch...that sucks. That bolt is torqued to 13ft lbs...would JBWeld hold it? Or what about having it professionally welded?
I bet Baxters has a case... http://www.baxtercycle.com/ (http://www.baxtercycle.com/)
Good luck, and let us know how you make out.
Pat
Thanks for the help. I've pulled the motor and sent it to a rebuilld shop that is going to try and weld it. Does anyone know if there is a fix for the sprag clutch problems. While i've got things apart I'd like to take care of any other known problems. Thanks
No fixes that I've ever read about...you've got the bigger/better one already in the '98.
The alternator shaft, though...you could 'fix' that while it's apart...
Thanks I've heard of the alternator problems but don't know the specifics. What needs to be replaced?