TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: houdini on May 30, 2006, 11:14:20 PM

Title: Clutch problems
Post by: houdini on May 30, 2006, 11:14:20 PM
Hi everyone,

Odd question hope someone can help.



Problem I have is i can only work a clutch lever with my little finger (!) as I don't have the other three (sure they are round 'ere somewhere). Anyway been riding a 125 with an easy clutch from Demon Tweeks which is fine for cable systems.

Doing my DAS next week and so sure I'm going to pass I've gone out and bought a Triumph Tiger 900 that has a hydraulic clutch. Ive bought adjustable levers for it which brings it back a bit but its bleedin heavy!



So (finally) my quastion is:

Can you use lighter DOT fluid to lighten the action?

Fit a larger reservoir?

Fit shims to bring the lever back further?





Any suggestions would be helpful, why I bought such a big bike being a shortarse baffles even me, but Ive lifted the forks a bit through the yokes and dropped the rear so I can tipitoe at the lights!



Cheers :wink:  :D
Title:
Post by: Brother Number One on June 01, 2006, 12:45:46 PM
I don't think lighter fluid will make any difference.  I'd think about a longer lever, perhaps.  Good news is that you can probably change up without the clutch a lot of the time.



Finger loss does give you an unfair weight advantage  :wink:
Title:
Post by: Guest on June 02, 2006, 11:15:08 PM
Not much help I know now that you've already bought the bike BUT...the later Tigers do have a cable clutch. Sell the steamer and get a later one then fit your "easy clutch" device.
EhPortal 1.34 © 2025, WebDev