Ok,I did look and didn't see what I was looking for,so excuse me if this has been addressed before.How do you remove the air filter.looks like I have to take of a side panel? And is there an aftermarket that we are using?
You need to pull the gas tank. :roll: K&N filters are popular.
Quote from: "WIDGIN"You need to pull the gas tank. :roll: K&N filters are popular.
Thanks
Well,guess that's next.I have the bike remapped for the track pipe.Changing filters gonna make a differance?
I wouldn't know...I changed to K&N at my first service and never looked back. ;-)
Quote from: "ridin gaijin"I wouldn't know...I changed to K&N at my first service and never looked back. ;-)
So I'm up for my 20000km (12000Mi) service. I noticed that the air filter is to be replaced should I spend the extra $ for a KN filter of stay with the stock filter.
War and Piece has been written about K+N's,what i've found with a K+N, race tune, open pipe,and the airbox mod,my 955 pulls a 19 tooth engine sprocket like it did an 18 in stock trim.
K&N air filters will increase performance , period . But now I will throw a wrench in the works .
Here is something to ponder . The K&N increases performance due to the fact that more air is able to pass thru it faster . That being said , if you take a K&N filter and hold it up to the light and do the same with the stock element , you can see why a K&N passes more air ,
I run a K&N filter on my mustang for that reason , more power !
My mustang does not go down dirt and gravel roads or trails , the tiger does , if you can pass more air you are also able to pass the really fine sediment that will do in a set of valves or rings .
I have seen the trail of really fine powder in the mustang air tract from using the K&N and it doesn't even go down dirt roads .
Now it's your bike , you decide .
My steamer is running what triumph made for it because it does go down dirt roads and such . and I have never found the fine sediment in the air tract after the filter , repeat , I have seen it on the car with the K&N
Quote from: "95mustang"take a K&N filter and hold it up to the light and do the same with the stock element , you can see why a K&N passes more air
Truth. There are a million little pinholes in the pleats of K&N's. I had one in my truck, and seeing that, I held it right up to my eye (with one eye closed), and I could read my license plate through it.
If one can read a license plate through your air filter, it ain't filterin'. Yeah, it can keep rocks and lizards out of your engine, but you may as well take the screen out of your front door and wrap it around your intake.
No more K&N's for me. Ever.
i'm not a fan of K&N either, any recommendations for something decent out there thats not OEM but works well?
My steamer is running what triumph made for it because it does go down dirt roads and such . and I have never found the fine sediment in the air tract after the filter , repeat , I have seen it on the car with the K&N[/quote]
Triumph never made any Tiger to go off road,go on a factory tour and ask e'm!!,some years ago went on an organised tour just for Tiger owners,the moment the talk went to off roading the staff were under the table.
How about BMC filters. I've seen them online for Steamers. Are they similar in construction to K&N with regard to "holy bits"?
It's very possible that they're not much different from K&N's. Their website says they're a pleated cotton filter. Same same.
http://www.bmcairfilter.com/infoOEM.asp (http://www.bmcairfilter.com/infoOEM.asp)
I have a little over 55thousand on my Tiger and am on my 2nd stock air filter.
The stock filter does an admirable job of filtering and I have taken my bike on some really nasty mucky dusty roads in alaska and only had to clean the filter. I'm a believer in the old adage if it works well leave it alone
I can't remember the last bike i ran without an K+N,mor HP?? i doubt it,but i've always got better throttle response,as for letting more dust through,if ever put 100,000 on the motor i'll let you know :wink:
The K&N's need to be oiled. And washed. Frequently! If you adhere to their regimen of cleaning, oiling, rinsing and repeating then you will get better filtration than stock AND better performance. Problem is, unless you're on someones pit crew, that kinda religious maintenance prolly aint gonna happen so you're better off running what the Triumph folks designed the bike around. Also, most people that try to do it the K&N way wind up putting too much oil on the filter anyway...
Just my $.02
the stock triumph filter for the steamers is a very nice foam filter that can be washed and reused , I also use NO-toil filter oil on it and in 50k + i am only on my second airfilter from triumph
Quote from: "pit0rz"The K&N's need to be oiled. And washed. Frequently! If you adhere to their regimen of cleaning, oiling, rinsing and repeating then you will get better filtration than stock AND better performance. Problem is, unless you're on someones pit crew, that kinda religious maintenance prolly aint gonna happen so you're better off running what the Triumph folks designed the bike around. Also, most people that try to do it the K&N way wind up putting too much oil on the filter anyway...
Just my $.02
Actually that post raises an interesting point,my Tiger has 26,000 miles on it,over the years it's had an almighty hammering,but when it comes to looking after it,my idea of cleaning it,includes takeing the brake pads out and cleaning the calipers,and i know plenty of other guys who do the same,so it's a mighty big assumption that people don't maintain a K+N,and Triumph just like any other manafacture build a bike to a price.
There was a marked difference when i fitted my K+N,as to people paying extra as stock i doubt it,and there's less sales on spares,paper filters are good for turnover!!!
The question begs to be asked . DO YOU RIDE IT IN THE DIRT !?
E'r no i don't,but why would i,it's not an offroad bike,ask the factory :lol:
You should tell that to Mudhen :shock:
I've seen his bike videos , wow !I only ride my crf honda those places LOL
I've seen his bike and he's done a good job,but that ain't what it was built for,and i say that as someone who gave up road riding for 10 years while i raced an enduro bike.
Off topic, but 95mustang, I like your sig. Words for me to try to live by...! :)
Quote from: "ridin gaijin"Off topic, but 95mustang, I like your sig. Words for me to try to live by...! :)
call me mustang I don't know where that 95 came from it was so long ago when i registered
paging stretch , change me to just plain ol mustang can you do that ?
'M kay.
thanks stretch you da man