Print Page - Torque Specs?

Title: Torque Specs?
Post by: ThreePutt on February 04, 2008, 06:15:47 PM

Is there a chart somewhere listing all the torque specs?

Specifically I'm planning on installing a set of engine guards and bar risers. If there's no chart, would anyone know the specs?

Also, do I need to use Loctite? I'm new at working on anything mechanical, so any help would be appreciated.

Thanks!

Title:
Post by: iansoady on February 04, 2008, 06:21:12 PM

http://www.triumphrat.net/tiger-workshop/6676-torque-settings-info.html

Title:
Post by: HappyMan on February 04, 2008, 06:57:41 PM

My service manual said 80 nm for front and rear motor mounts....

Title:
Post by: ThreePutt on February 04, 2008, 07:41:22 PM

Thanks!

Title: Re: Torque Specs?
Post by: curt on February 05, 2008, 02:28:32 AM

Quote from: "Chyron"Also, do I need to use Loctite? I'm new at working on anything mechanical, so any help would be appreciated.

Thanks!

Loctite is your friend. Helps you from loosing stuff on the road. The medium strength (blue color) is good for all around. The high strength (red color and feared by many) really locks it home. Don't use to much, a dab will do ya. A drop on bigger bolts.

Title: Re: Torque Specs?
Post by: ThreePutt on February 05, 2008, 03:16:44 AM

Quote from: "curt"
Quote from: "Chyron"Also, do I need to use Loctite? I'm new at working on anything mechanical, so any help would be appreciated.

Thanks!

Loctite is your friend. Helps you from loosing stuff on the road. The medium strength (blue color) is good for all around. The high strength (red color and feared by many) really locks it home. Don't use to much, a dab will do ya. A drop on bigger bolts.

A dab, got it. Thanks.

TigerTriple.com

Tiger Time => Girly Talk (1999 - 2006 Tigers) => Topic started by: ThreePutt on February 04, 2008, 06:15:47 PM