How hard is it to remove the stocker and repace with a Hagon?
Thanks,
Bob
Quote from: "thx1158"How hard is it to remove the stocker and repace with a Hagon?
Thanks,
Bob
On a scale of 1- 10 (10 most difficult) about a 4. The upper bolts are a pain to reach and you have to have the correct Torx. The lower bushing can be pushed out with a socket extension (unless it's rusted in there).
I'd say 5,because you'll be thinking it's harder than it really is!!!
You have to watch out for the roller bearings dropping out.