TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: tattyTigger on May 27, 2008, 01:16:18 AM

Title: crash bars...
Post by: tattyTigger on May 27, 2008, 01:16:18 AM
can't find them anywhere..was looking for some Hepcko Becker engine bars really, anyone know anywhere that still has some in stock?
Title:
Post by: Stretch on May 27, 2008, 02:35:15 AM
Thunderbike carries a set for Steamers...  http://www.thunderbike.co.nz/spi/tbike_tig (http://www.thunderbike.co.nz/spi/tbike_tig)
Title:
Post by: pit0rz on May 27, 2008, 02:44:16 AM
doh. never mind!  Wrong bike!
Title:
Post by: John Stenhouse on May 27, 2008, 11:08:48 AM
Not much help but jack Lilley still list some here:

http://www.jacklilley.com/view_part.asp ... art_id=156 (http://www.jacklilley.com/view_part.asp?category_id=15&category_type_id=165&part_id=156)
Title:
Post by: John Stenhouse on May 27, 2008, 11:09:46 AM
Those look like Hepco and Becker ones too..............hang on I'll have a surf
Title:
Post by: John Stenhouse on May 27, 2008, 11:16:48 AM
Only other ones I could find are TM ones here:
http://www.tm-accessories.de/shop/produ ... 9b32fb7760 (http://www.tm-accessories.de/shop/product_info.php/info/p25_Crash-Bars-Tiger-900.html/XTCsid/58bb9265c8f6d735a461579b32fb7760)
Title:
Post by: nightrunner on May 27, 2008, 06:18:50 PM
This was years ago but I went straight to the H&B web site and found a link to info for the U.S. distributor.  If I had it all to do over again I would go with Thunderbike bars though.  The H&B's will protect the tank if the bike tips in a parking lot or perhaps a low speed laydown, but I think those band iron mounts are going to buckle if hit hard.   Someday (if it ever gets here) I hope to weld gussets on to those lounts or replace with tube steel.  JMHO FWIW.
Title:
Post by: tattyTigger on May 27, 2008, 07:08:49 PM
thanks for the links, just gotta raid the piggy bank first  :oops:

...they should make the old girl look a tad meaner huh?

(http://www.webloft.net/public/user~4793/tiger1.jpg)
Title:
Post by: tattyTigger on May 30, 2008, 09:31:37 PM
Quote from: "John Stenhouse"Only other ones I could find are TM ones here:
http://www.tm-accessories.de/shop/produ ... 9b32fb7760 (http://www.tm-accessories.de/shop/product_info.php/info/p25_Crash-Bars-Tiger-900.html/XTCsid/58bb9265c8f6d735a461579b32fb7760)

anyone dealt with these guys?, tried to confirm their price, seems very cheap even given the cr@ppy exhange rate, but they haven't come back to me  :?

...maybe I shoulda tried emailing them in German  :lol:
Title:
Post by: John Stenhouse on May 30, 2008, 09:49:48 PM
I bought their bars for the Girly, but I got mine through Jack Lilley, so not much help then :oops:
Title: Hepco & Becker USA
Post by: Hooligan on May 30, 2008, 10:04:01 PM
Eurotech Motorsports
1017 Willow Ave
Chico, CA.95928
Tel.: + 1 530 345 7145
Fax: + 1 530 345 7138
eMail: www.eurotechmotorsports.com (http://www.eurotechmotorsports.com)
Title:
Post by: harre on May 31, 2008, 12:20:27 PM
www.aaa-triple-a.de (http://www.aaa-triple-a.de) also have the H&B crash bars. Cannot say if they are reliable, I have not bought anything from them. I have tried www.polo-motorrad.de (http://www.polo-motorrad.de) which I find very good. I have their tank case on my Steamer (Pharao Enduro Riemen Dakar, about $65), works really well. I think they also can supply the H&B crash bars even though you cannot find it on the web shop, and while you're at it you might look at the TRAX alu-cases.
Title:
Post by: John Stenhouse on June 01, 2008, 01:21:33 AM
Cool, new sites to look through! have to polish up my german though :lol:
Title: crashbars
Post by: geno955i on June 11, 2008, 01:16:10 AM
hi,
  hepco bars available for steamer on ebay,got mine 4 mths ago,
Title:
Post by: tgrrdr on July 10, 2008, 09:46:13 AM
I don't remember how much they cost years ago when I got them but the Thunderbike bars (http://www.thunderbike.co.nz/shopn:SP:1056918987:pv=TBIKE,pg=35270,co=TIG) [/color] are pretty nice. Not sure if I'd pay $495 for them though.

(http://www.theshop.co.nz/TBIKE/items/images/b6675_1.jpg)
EhPortal 1.34 © 2025, WebDev