Print Page - How do you adjust the left carb mix screw while on the bike?

Title: How do you adjust the left carb mix screw while on the bike?
Post by: Dr. Mordo on July 26, 2008, 01:41:54 AM

Not me on the bike, the carb is on the bike. I have a skewdriver so I can sorta do the other screws, but for that one it is impossible to get on because of the water pipe coming out of the head.

What am I doing wrong?

Title:
Post by: JetdocX on July 26, 2008, 02:02:18 AM

Motion pro makes a trick little 90 degree worm-drive screwdriver for that purpose. It's reasonably priced....if I was in a hurry, I'd find a link for you but I gotta go.... 8)

Title: Motion Pro
Post by: BR on July 26, 2008, 02:15:41 AM

Try this:

http://www.motionpro.com/motorcycle/too ... ting_tool/ (http://www.motionpro.com/motorcycle/tools/view/pilot_screw_adjusting_tool/)
or this:

http://www.motionpro.com/motorcycle/too ... ex_driver/ (http://www.motionpro.com/motorcycle/tools/view/90_degree_1_4__hex_driver/)

Title:
Post by: Dr. Mordo on July 26, 2008, 04:22:53 AM

Thanks mucho! I may buy that first one.

TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: Dr. Mordo on July 26, 2008, 01:41:54 AM