gone!
I visited their website and learned nothing about our bar-end weights. How do these guards fit in with them? I am interested in buying.
good question!
I wasn't able to make them fit with the weights on there - so I was just using the spacer that is on the end of the weight, and the screw for the weight. This is the same bar end weight on 1999-2006 models.... it takes up the small space between the barkbuster and the handlebar.
Item 12 is the "spacer" - it's listed as a bushing. 9 is the stock retaining bolt I reused.
(http://www.sokratys.com/images/ebay/TR-0606-132.jpg)
if you are off roading more - then the recommended way is to remove the locknut inside the handlebar, remove the weights too - use the supplied lock and screw.
Quote from: "walker"good question!
I wasn't able to make them fit with the weights on there - so I was just using the spacer that is on the end of the weight, and the screw for the weight.
if you are off roading more - then the recommended way is to remove the locknut inside the handlebar, remove the weights too - use the supplied lock and screw.
I like the look of the bar ends, so I'll pass on your Barkbusters.