Hi, I'm looking for the right (brake side) pass peg for a Steamer. I bent mine and now my ladie friend complains that one peg sits lower then the other.
Please let me know what'cha got!
I have paypal
Thanks
Yosh (in Seattle WA)
If you find one, or if someone has an extra one after Yosh gets his, I'm looking for one too.
what part are you looking for ? If it is #26 you might want to look at the frame where it attaches . Usually thats what ends up being bent , the mounting lugs on the frame get tweaked not the actual footpeg bracket .
and if it is your footpeg hanger thats screwed a new one from bike bandit is 40 bucks
(http://www.bikebandit.com/assets/schematics/Triumph/TR-0606-2098.gif)
Thanks again mustang, your always very helpfull, it is indeed the frame tab that was bent. I used a adjustable wrench and bent back into place.
"In other news", I finished my luggage rack and its at the power coating shop today. I'll post some pics on a new thread. Its a bit of a hack job but it will easliy do the trick. I will also be using huge bags (for the ladie and I): Hardigg im2700, they are 49liters each and only weigh 11lbs each!!!
Thanks agian
YOSH
Any one still looking for the right side pillion footpeg on a Steamer?
Quote from: "Hooligan"Any one still looking for the right side pillion footpeg on a Steamer?
Yes, that would be me. Also in the market for a fuel tap if you happen to have one of those around.
right side pillion footpeg assembly on ebay
http://cgi.ebay.com/ebaymotors/1996-TRIUMPH-TIGER-RIGHT-REAR-PASSENGER-PEG_W0QQcmdZViewItemQQcategoryZ35611QQihZ010QQitemZ200213762156QQrdZ1QQsspagenameZWDVW