Print Page - loads of 2005 tiger bits for sale

Title: loads of 2005 tiger bits for sale
Post by: RobClare on January 22, 2009, 05:06:03 PM

HI,
Broke my 13000mile 955i tiger last year so all bits good condition

Have still got:

Clocks,
both side panels
Front fairing
Radiator
oil cooler
Down pipes
All fuel and engine electrics
pair spoked wheels with tyres
Rear swing arm and mono shock
pair of straight fork stanchions
yokes
headlights
fairing subframe
rear seat
all brake cailpers
rear of front mudguard
chain/sprockets
heated grips
touring scottoiler / oil / instructions
Airbox
battery tray
expansion bottle
ECU
other ECU
Levers
Foot pegs
starter motor
Alternator
plus loads small bits

will send abroad, buyer to cover postage

email robclare@ukonline.co.uk
Mobile +44 07790386432

Title:
Post by: 2004Tiger on January 22, 2009, 08:11:47 PM

You don't list, but I need a right side bar end weight with screw for my 2004 955i. (same as left side?) More than that, if you have a bar end with throttle control I prefer it. I also need a brake lever and the right side pannier lid (hinged portion), black. You could respond in a PM with your payment preference to save time. Thank you.

Title:
Post by: The Kurgan on January 22, 2009, 08:55:45 PM

How much for both side panels?
Also, how much for the stock ECU?
Thanks in advance.

Title:
Post by: HappyMan on January 22, 2009, 09:06:49 PM

Anyone know if the spoked wheels from the 05 will fit my 06?

Title:
Post by: abruzzi on January 22, 2009, 11:15:58 PM

Quote from: "HappyMan"Anyone know if the spoked wheels from the 05 will fit my 06?

A true 05 should have cast wheels just like an 06. I believe the wheels from a 99-04 won't work in an 05-06. It's possible they are some sort of custom wheels though.

Geof

Title:
Post by: John Stenhouse on January 23, 2009, 12:11:41 AM

Did cast wheels come in at 05? If so, this may be an 04my bike registered as an 05. I know that my 05 Canadian bike has different rear wheel fixing and different pads for the brakes compared to my 2000 bike here. Can't remember what the front was like but I have a feeling it was different too.

Title:
Post by: haulin' daze on January 23, 2009, 12:42:47 AM

All stateside 05-06 came with cast wheels. No spokes for us folks. :lol:

Title: Re parts
Post by: RobClare on January 23, 2009, 07:38:13 PM

Your all correct Guy's the wheels are from 99-04 bikes. Bought in error.
Do also have rear and front disks for 05 bike

Cheer's

Rob

Title: More parts found!!!
Post by: RobClare on January 23, 2009, 08:07:14 PM

Missed a load off.....

Both brake master cylinders
Cast wheel sprocket carrier and cush rubbers
foot peg hangers
Std screen
Cleverly cut down aftermarket screen-goes in place but lower than standard, lower than 'sport' version=no noise!!
rear tail cover panel
both black tank infill panels
complete lock set including seat release and petrol cap+2 keys
Fuel pump
Fuel level sender
indicators
spare speedo

Please come back if you need something not listed

Rob.

Title:
Post by: matttys on January 23, 2009, 08:26:55 PM

Do you have the right or left hand switch gear? I'm mostly interested in the right, but would entertain either.

Title:
Post by: Cos on February 07, 2009, 06:04:48 PM

Is that fuel level sender still available?

I'm in Cyprus

Title:
Post by: Stretch on February 08, 2009, 12:04:03 AM

Private Message out to you, RobClare.

Title:
Post by: V.DUBBER on February 09, 2009, 12:16:23 PM

Hi how much for two indicator lenses and the clutch lever posted to Sunny Devon?

Title: Fuel level sender
Post by: RobClare on February 09, 2009, 11:21:02 PM

Quote from: "Cos"Is that fuel level sender still available?

I'm in Cyprus

Cos, yes it is, you have a PM

Title: Re: Fuel level sender
Post by: Cos on February 10, 2009, 07:24:09 AM

Quote from: "RobClare"
Quote from: "Cos"Is that fuel level sender still available?

I'm in Cyprus

Cos, yes it is, you have a PM

Ooops. Ok, on it.

Could you find out how much p&p would be to Cyprus?

Title:
Post by: AK Tiger on February 10, 2009, 07:55:01 AM

I'm looking for both passanger pegs and the heated grips if they come with the switch and wiring.

Title:
Post by: Cos on February 11, 2009, 08:30:55 AM

Another thing...you wouldn't happen to have a lock set for the Triumph top box, would you?

Title: lock set
Post by: RobClare on February 11, 2009, 12:12:48 PM

Sorry Cos,

Only ignition, tank, and seat locks

Title: ONLY JUST SEEN THIS
Post by: Tiger Bob on April 11, 2009, 06:01:15 PM

Hi Rob I'm interested in the screens if still available.
Cheers
Bob

Title:
Post by: twentyfiftyoil on April 13, 2009, 11:19:14 PM

Hi I after the connector that fits from the wiring loom into the Air Temperature Sensor. (two pin connector on the right of the Air Box. Also rear light unit,

Title:
Post by: atokad on April 17, 2009, 07:06:44 AM

PM sent

Title: Tiger Bits - ECU
Post by: dkaufman on June 17, 2009, 02:07:22 PM

Looking for an ECU part number T1291000 in working order. Do you still have one?

TigerTriple.com

Marketplace => trash can => Topic started by: RobClare on January 22, 2009, 05:06:03 PM