TigerTriple.com

Talk => Speaking Of Bikes... => Topic started by: tigerjohn on June 11, 2004, 10:41:03 PM

Title: Suggestions for an '06 Tiger
Post by: tigerjohn on June 11, 2004, 10:41:03 PM
How would you improve the '05 Tiger? I'd go for (1) an underseat silencer to allow for a useable second pannier, instead of the 1/2 pannier we currently have. Then (2) a new windscreen with better wind and noise protection. (3) adjustable footrests to give a bit more reach when riding but still allowing feet to touch the ground when stationary. And, last but not least, what about (4) a nice, low maintenance shaft drive? Your thoughts on the next Tiger?  .....and a late afterthought: perhaps (5) an extra 250cc to take it to 1200 - face down the competition?
Title:
Post by: BigDave on June 12, 2004, 05:20:03 AM
All new frame.



Spoke option



Cosmetic makeover.



More protection for header & underside.  Need to protect oil cooler lines, radiator hoses etc.



How about a smaller profile header under the bike so you gain some clearence?



They build this, I'll come back.... :-k
Title:
Post by: Sasquatch on June 13, 2004, 06:19:41 AM
1. Proper set of forks with adjustable valving/preload (WP, Ohlins, etc.)

1a. Proper shock as well.



2. As Big Dave stated, protection of the underside.



3. Rerouted exhaust, can gain about 2" of clearance.  Heck, if they just use a flat collector instead of the tri model, it would gain a good 1.5".



4. Come from the factory with the Gel seat.



5. Spoke wheels that are capable of tubeless. (minor gripe, but noteworthy)



6. Keep the chain.  (So, I'm a chain lover....... (whips too.))



7. Hydraulic clutch.  Going to do the Magura kit on mine soon.



8. Copy BMW's roadside assistance for the warranty period.  (minor gripe, not worth the additional $7k for the BMW)



9. Loose another 20-40 lbs.  Much more than that and it would loose some of the smoothness on the pavement.
Title:
Post by: Chris Canning on June 13, 2004, 08:24:50 PM
I'll take an exact copy of the artist impression in this weeks MCN,and if it comes out the same i'll buy one, simple as that.



Chris
Title:
Post by: Brock on June 14, 2004, 10:56:56 PM
What? complete with colour co-ordinated bash plate? in Kermit Green?

Or do you mean the "Numero Tre" version?

I'll take the latter, but only if both wheels match and i'ts got an underseat pipe (or one on each side). Call me old-fashioned but I don't like the idea of a can on one side and a pannier on the other.
Title:
Post by: BigDave on June 14, 2004, 11:16:47 PM
Quote from: "Chris Canning"I'll take an exact copy of the artist impression in this weeks MCN,and if it comes out the same i'll buy one, simple as that.



Chris

Is there a picture of that floating around anywhere?
Title:
Post by: Chris Canning on June 15, 2004, 12:06:17 AM
Green??? why are they only going to be available in one colour!!!.



I've no doubt Triumph will stick the pipe under the seat,so i'll have that same shape as 999 thankyou!!!!



Dave. Don't even bother looking,so long as your on you offroad thing,it's completely opposite from what you want,but someone at Triumph has got his head into gear,by realiseing how well Ducatis Multistrada has sold,even with a stone age engine in!!!.



Chris
Title:
Post by: BigDave on June 15, 2004, 12:24:40 AM
Quote from: "Chris Canning"Green??? why are they only going to be available in one colour!!!.



I've no doubt Triumph will stick the pipe under the seat,so i'll have that same shape as 999 thankyou!!!!



Dave. Don't even bother looking,so long as your on you offroad thing,it's completely opposite from what you want,but someone at Triumph has got his head into gear,by realiseing how well Ducatis Multistrada has sold,even with a stone age engine in!!!.



Chris

Well, maybe then it'l be a upright Speed 3 with good springs, a Daytona cam and fast looks complete with Tourance's.  I'll get one for the other side of the garage!  :D/
Title:
Post by: Chris Canning on June 15, 2004, 08:59:56 AM
Hi Dave



Tourance!!!! I've gave those up two years ago!!,it's got a Daytona 955 front end on it,with a single sided swing arm, with same rubber as what i run on mine now.



Chris
Title:
Post by: BigDave on June 15, 2004, 04:41:20 PM
Quote from: "Chris Canning"Hi Dave



Tourance!!!! I've gave those up two years ago!!,it's got a Daytona 955 front end on it,with a single sided swing arm, with same rubber as what i run on mine now.



Chris

Why don't ya scan us a pic of the MCN picture?
Title:
Post by: Chris Canning on June 16, 2004, 12:25:38 AM
Hi Dave



You want an honest answer!! bikes are my thing not computers!!,but i'm sure someone from the Uk can do it.





Chris
Title:
Post by: tigerowner_ut on June 16, 2004, 12:25:40 AM
Lower weight

Adjustable Suspension

Aluminum panniers

less vulnerable exhaust

standard centerstand

Adventure type model w/knobbies

Tubeless mag / tubless spoke option

Lower center of gravity

one piece seat that is meant for your arse

Lower first gear

taller 6th gear

easily accessable air filter

more stretched out seat/peg relationship
Title:
Post by: elemint on June 21, 2004, 08:51:06 PM
Use the pre 99 steam look for the 06!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



I dont think i can take another year of the girly.... Ugh. :evil:
EhPortal 1.34 © 2025, WebDev