Print Page - Headstem bearings

Title: Headstem bearings
Post by: delecti on March 18, 2010, 02:26:14 AM

gooday,
headstem bearings, mine are buggered and in the how to thread the bottom bearing is quoted as a mcmaster carr item #6677k38 but it is a timkin item does anyone have the timkin number I would like to have them on hand before I start.
thanks for the great how to.
Mark
06 silver tiger

Title:
Post by: Timbox2 on March 18, 2010, 07:51:20 AM

Ive done a bit of digging and I think its a 32006 jrrs, the jrrs is the seal attached I believe.

Thing is that number cross references to a Mcmaster Carr 6677k58

http://www.mcmaster.com/#ball-and-rolle ... gs/=69m5ny (http://www.mcmaster.com/#ball-and-roller-bearings/=69m5ny)

Title:
Post by: delecti on March 19, 2010, 12:13:18 AM

thanks old mate

Title: found them local
Post by: delecti on March 19, 2010, 12:27:55 AM

the local bearing centre had them in stock A$60 or about US$52 so it is all good. Laughin.
Mark
06 silver tiger.

Title:
Post by: Timbox2 on March 19, 2010, 01:06:25 AM

Quote from: "delecti"thanks old mate

No worries

Title:
Post by: blacktiger on March 23, 2010, 10:26:46 PM

Tip....
Easiest way to get the lower bearing off the stem is to cut through it with a dremel.

TigerTriple.com

Tiger Time => Girly Talk (1999 - 2006 Tigers) => Topic started by: delecti on March 18, 2010, 02:26:14 AM