Have just finished doing the TB's on my 01(using carbtune) and was wondering what would be best to use to lock the adjustment screws once they have been adjusted. I was thinking of blue lock tight but wondered if there is anything else especially for this sort of thing.
thanks in advance!
GC
I don't think locking them would be a good idea. How would you adjust them next time?
They are supposed to be locked according to the manual - mine were. I used some Loctite 222 (purple).
Ah, show what I know :oops:
If you think back to how small the adjustment of the screws had to be to get them exactly right, you'll not be surprised at how quickly they vibrate out of sync if you don't lock them somehow...