I thought I would share this snippet of information as when we had a UK meet recently, one of the lads had a sidestand switch failure and was unable to move.
I am currently rewiring my 93 Tiger and fitting an electronic fuse box from www.motogadget.de (http://www.motogadget.de). Having studied the standard wiring loom, I have come across the following work around for anyone with a standard wiring loom who has the sidestand or neutral switch fail.
Under the seat, on the left hand side (as you are sat on the bike) there is a white connector block with a black wire looped between pins 1 and 3. Some people may have an alarm plugged into this, but I have yet to see one. If you don't have the alarm, then all is good. If you run a wire from earth to the this looped wire, this will convince the CDI that the bike is either in neutral and/or the sidestand is up and should get you home.