My '96 Steamer has sat for about a year due to a bad non-motorcycling accident I had last winter, so I was not surprised when it did not start right up. But after trying the tricks that usually get it to start right up i.e. adding SeaFoam, draining the carbs and refilling them with fresh fuel, cleaning and testing all three plugs (which all sparked nicely) it is still not catching or sounding like it is about to catch when it cranks. Any ideas on what I should try next? Thanks.
pull the carbs clean the pilot circuit in each carb .
check the sticky threads on the steamer page
bring it to me ..........your only 60 miles away
bring it to me ..........your only 60 miles away[/quote]
...........................................................................................................
dont do it, it's just a ploy to get another steamer in his collection :lol: