Print Page - Needing Shims // Got Any You Want to Sell

Title: Needing Shims // Got Any You Want to Sell
Post by: 19dajudge on January 06, 2011, 04:10:23 AM

Adjusting the valves on my Steamer. I need the following shims if any one has extras:

two 2.25
one 2.35
one 2.5

Thought I would ask hear before turning to my local Hoodat / Kamakazi / Susuckme dealer who will only tell me he has to order them. Let me know how much. Thx

Title:
Post by: Colonel Nikolai on January 06, 2011, 05:58:24 AM

What sizes do you have to trade?

Title:
Post by: 19dajudge on January 06, 2011, 03:44:19 PM

Have a one 2.88, two 2.82, one that says 3.04 but actually measures about 2.8 that can me traded.

Title:
Post by: Colonel Nikolai on January 06, 2011, 04:30:50 PM

Sorry man. None of those are around the sizes I could use in the next year or so.

I went to my Triumph dealer and they required $7 AND my old shim in trade. Cheaper route is to buy on ebay. I was getting them for around $5 each without trade. Do you want me to get you the sellers I used? Let me know I can look them up.

Title:
Post by: zombie2 on January 07, 2011, 03:56:24 PM

I've got a few.
I'll measure them later today and let you know what I got and if they work I'll swap ya

Title:
Post by: 19dajudge on January 11, 2011, 05:24:23 PM

Found some at my local Yamaha dealer. $7 per but saves further delay.

TigerTriple.com

Marketplace => trash can => Topic started by: 19dajudge on January 06, 2011, 04:10:23 AM