Print Page - Did I see an article in here about fitting stick coils to a

Title: Did I see an article in here about fitting stick coils to a
Post by: Jaythro on January 27, 2011, 12:14:10 AM

Steamer

I am not impressed with the search engine in this forum LOL

Title:
Post by: Mustang on January 27, 2011, 01:04:32 AM

quick search found this http://www.tigertriple.com/forum/viewto ... tick+coils (http://tigertriple.com/forum/index.php/topic,6439&highlight=stick+coils)

and this http://www.tigertriple.com/forum/viewto ... tick+coils (http://tigertriple.com/forum/index.php/topic,3799&highlight=stick+coils)

and a few others . when you use search, tick the button that says "search for all terms" you get better results

Title:
Post by: Jaythro on January 27, 2011, 01:39:44 AM

Cheers Mr Stang I may have made a bobo!

I got 3 coils from a 1050 tiger

Well I'll update as I go along

I'd intended on doing a one at a time change like just to do the coils but while I am in there I will pull the rocker cover and check the clearances and see from there

I may build it back up and run it to check for change then pull the tank off and blow out the carbs and the air filter

Title:
Post by: BruKen on January 27, 2011, 04:11:58 PM

:P tut tut

This is an open forum, if you want google functionality, use google

search term stick and coil site: tigertriple.com

http://www.google.co.uk/#sclient=psy&hl ... d2983b4ff1 (http://www.google.co.uk/#sclient=psy&hl=en&rlz=1R2GPTB_en-GBGB375&q=stick+and+coil+site:tigertriple.com&rlz=1R2GPTB_en-GBGB375&aq=&aqi=&aql=&oq=&pbx=1&fp=e40ff1d2983b4ff1)

TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: Jaythro on January 27, 2011, 12:14:10 AM