Print Page - Non-Triumph Foot pegs that would fit my Girly

Title: Non-Triumph Foot pegs that would fit my Girly
Post by: Putts255 on February 06, 2011, 11:48:17 PM

I am looking to these very reasonably priced foot pegs. See link below. They have them for all the standard dirt bikes and some of the KTM's. They also have them with a 5mm drop.

Anybody know which ones would be the est fit? I know I may have to do some modification.

Thanks much

http://www.gnarlyparts.ca/

Title: foot pegs
Post by: delecti on February 07, 2011, 05:44:01 AM

I have just put a set of pivit pegz on my 06 Girly I think you can get them out of the states for around US$155 delivered fit straight on no modifying, and you get a 20deg each way movement. The vibs at 35 to 4000 rpm are no worse than the originals.
if not the pegs on a DR650SE are about 1mm to wide but the pin is the exact same size.

Mark
06 silver tiger

Title: Re: foot pegs
Post by: jwray76 on February 07, 2011, 01:34:32 PM

Quote from: "delecti"if not the pegs on a DR650SE are about 1mm to wide but the pin is the exact same size.

Mark
06 silver tiger

Hadn't heard this before. If this is true I will be trying to find some nice DR650 pegs on the cheap to modify soon. Are the 650 pegs the same height or do they provide a little drop since there is no rubber?

Title:
Post by: Mustang on February 07, 2011, 01:46:20 PM

http://tigertriple.com/forum/viewtopic. ... 5344#65344 (http://tigertriple.com/forum/index.php/msg,65344#65344)
no modification needed for these and they lower the peg height by 1 inch .
Very comfortable for the knees

Title:
Post by: CoolHandLuke on February 07, 2011, 01:54:57 PM

Quote from: "Mustang"http://tigertriple.com/forum/index.php/msg,65344#65344
no modification needed for these and they lower the peg height by 1 inch .
Very comfortable for the knees

Was just about to add that link, for ya :)

Title:
Post by: jwray76 on February 07, 2011, 02:21:07 PM

Mustang you have a PM. That price satisfies my cheap budget :)

Title:
Post by: Putts255 on February 07, 2011, 05:46:26 PM

Of course this had to happen on a Monday morning while I am in meetings....Argh!

Mustang, if the other party does not come through I would be prepared to jump in. I will send a pm from the other post as well.

Thanks.

Title:
Post by: Timbox2 on February 07, 2011, 06:09:05 PM

Another satisfied Brit with Mustangs pegs :thumbsup

Title:
Post by: jphish on February 07, 2011, 09:38:47 PM

I was going to say...I have the DRC type on my KLR, work ok - Mustang pegs on the Tiger, work great! No Comparison in quality or fit. They are a part of the bike, like the seat, thats is in constant use... & Ya get what ya pay for.

Title: mustang pegs
Post by: delecti on February 08, 2011, 06:49:55 PM

I inquired about these for an 06 Girly and was told they dont make them. So I hunted around and the pivot pegs is the only other peg that fitted or a modified DR peg. have had them on for a couple of week and they are great. the strength, quality and finish is fantastic. and for being an aussie australian made.
Lower would have been nice though
Mark

Title:
Post by: Putts255 on February 08, 2011, 08:23:47 PM

Well I think I have come to the resolution that I may just end up ordering the pegs that Mustang builds. A lot of good reports and happy people who have bought them.

My big issue was the cost and getting it by the wife who plays a very equal role in the monthly budget of the household (2 kids in University, she is only on part time hours for the next 4 months etc etc...).

The good news is that the city I live in recently announced any green light photo radar speeding tickets issued in the last 2 years will be refunded as there is a glitch in the software. So I know I will be getting $150 back for a ticket I got in the fall. I told the wife that as soon as I get this small windfall I will order my foot pegs from Mustang's site. :lol:

The only set back is my wife has 2 of these tickets and should be getting just over $200 back, now I cannot say where that money should go either....it will be hers to use.... :roll:

:D

Title:
Post by: delecti on February 09, 2011, 01:00:55 PM

Sorry mustang it was Sasquatch who didnt make pegs for that model.
and get which ever ones you want the pivot pegz are different is all and fit off the rack, the dr pegs are 1mm to wide is all.
Mark

Title: Re: foot pegs
Post by: pizzaman383 on February 10, 2011, 01:35:59 AM

Quote from: "delecti"I have just put a set of pivit pegz on my 06 Girly I think you can get them out of the states for around US$155 delivered fit straight on no modifying, and you get a 20deg each way movement. The vibs at 35 to 4000 rpm are no worse than the originals.
if not the pegs on a DR650SE are about 1mm to wide but the pin is the exact same size.

Mark
06 silver tiger

What type of shifter is that?

Title:
Post by: delecti on February 10, 2011, 11:15:56 AM

gear

Title: Re: foot pegs
Post by: Mustang on February 10, 2011, 01:45:33 PM

Quote from: "pizzaman383"What type of shifter is that?

other than the smart ass answer above :? .....I believe it is the OEM 2005/2006 gear change lever............. Bike bandit or dealer 100 bucks

Title:
Post by: delecti on February 16, 2011, 02:59:36 AM

mustang you party pooper I did answer the question! :roll:

Title:
Post by: JTT on February 16, 2011, 10:58:02 PM

Another +++ for Mustang's pegs. I've had mine for the past year and lots of miles... the added leg room is great, grip much improved and Mustang is absolutely top notch to deal with.

TigerTriple.com

Tiger Time => Girly Talk (1999 - 2006 Tigers) => Topic started by: Putts255 on February 06, 2011, 11:48:17 PM