Print Page - Header Bolt Function

Title: Header Bolt Function
Post by: 97tiger885 on February 22, 2011, 09:22:27 PM

Each of the header pipes on my '97 has a bolt head sticking out the front. Anybody know why those are there? Best guesses here are 1. allows access for diagnosis of exhaust gases for individual cylinders and 2. headers are shared by various models and allows for chrome stuff to cover up the pipes. Anyone?

++++++++++
Jon

Title:
Post by: BruKen on February 22, 2011, 09:41:06 PM

Right first time.

Title:
Post by: Mustang on February 22, 2011, 10:54:59 PM

[jeopardy] "What is CO2 meter Bungholes for $1000 alex ?"[/jeopardy]

Title: Header Bolt Function
Post by: 97tiger885 on February 24, 2011, 12:02:56 AM

Quote from: "BruKen"Right first time.

Anyone here ever done such an analysis?

+++++++++
Jon

Title:
Post by: BruKen on February 24, 2011, 12:14:19 AM

With a good carb balancer you can achieve the same result by adjusting the pilot airscrew as you would normally do with the throttle balance screws. Lean the screw in till max mg is met then back off a quarter turn.

TigerTriple.com

Tiger Time => Steamers (1993-1998 Tigers) => Topic started by: 97tiger885 on February 22, 2011, 09:22:27 PM