Print Page - Plastic Welding

Title: Plastic Welding
Post by: Bixxer Bob on February 23, 2011, 09:12:08 PM

A friend (steamer owner) needs some panels welding, but - much as I rack my brains, I can't think of the name of the well-known UK specialist that does "as new" repairs and paint.

Any offers?

Cheers,

BB

Title:
Post by: BruKen on February 23, 2011, 10:48:30 PM

May I ask what panels on a steamer are weldable :? :?

Title:
Post by: Bixxer Bob on February 23, 2011, 10:51:03 PM

Dunno, I don't own one, and the asker's 200 miles away....

Title:
Post by: BruKen on February 23, 2011, 11:17:15 PM

There are no metal panels on a steamer. There is some plastic welds on airbox and snorkel, but those would be cheaper new. Can you enquire?

Title:
Post by: John Stenhouse on February 24, 2011, 12:13:37 AM

Read the title..........PLASTIC WELDING

Title:
Post by: KuzzinKenny on February 24, 2011, 12:24:49 AM

Hey BB !! there's loads O stuff here............

http://www.advrider.com/forums/showthread.php?t=435783 (http://www.advrider.com/forums/showthread.php?t=435783)

that should keep ya busy !! :lol:

have fun !!

KK

Title:
Post by: BruKen on February 24, 2011, 12:27:15 AM

My bad. :oops:

Title:
Post by: rf9rider on February 24, 2011, 03:44:40 AM

I`ve done plastic welding on previous bike panels i`ve had.
Just takes a little practise and patience.
I used an ordinary soldering iron. :)

Title:
Post by: Mustang on February 24, 2011, 04:06:51 AM

http://www.urethanesupply.com/storeatv.php (http://www.urethanesupply.com/storeatv.php)

Title:
Post by: Bixxer Bob on February 24, 2011, 01:37:12 PM

The name I was looking for was "The Plastic Surgery"

Thanks anyway all...

Title:
Post by: Chris Canning on February 24, 2011, 05:19:06 PM

You want e'm welding/repairing and painting,Dream Machine,oddly enough saw their van in the Triumph factory carpark a couple of weeks ago.

Title:
Post by: Bixxer Bob on February 25, 2011, 12:31:19 AM

Cheers Chris! :wink:

TigerTriple.com

Talk => Speaking Of Bikes... => Topic started by: Bixxer Bob on February 23, 2011, 09:12:08 PM