I would like to make myself some panniers (hard case)...
My question is, can someone post some pictures of mounting points for the framework/brackets that you mount them too...
I have a TiG welder, have completed a welding cert through Tech college and am now in the cnc machining course... so making stuff wont be an issue I am just not sure of mounting points.. any help would be great.. thanks
take off the side cover and look at the subframe , there should be some threaded holes in the gusset plate that is welded to the upper sub frame pc . those are the points that the original givi brackets attached to .
and then the bottom front corner of the pannier mount has a strut that goes to the rear footpeg mounts .
thanks Mustang....
this weekend I have to pull some things off to take a look at other things so I guess then will work out too...