Had a mid speed laydown (15-35mph), and unfortunately my crash bars magnified the damage by concentrating the force in one spot. Not sure what brand of crash bars they were, but I do not recommend them now. They connect in two spots on each side, following the curve of the tank. If I had not had them, the fuel tank would be trash but there would be less repair work.
I need the following parts:
*Shift Lever (not clutch)
*LH driver's foot peg
*LH frame "ear". This is the sheet metal mounting point welded to the frame, which bolts to a bracket to the back left side of the head. (The crash bar pushed mine in, crumpling it). I am looking for this piece cut off of a salvage frame, possibly with the tubing attached for a short ways on either side)
*Fuel injection wiring harness? Mine got cut by the frame bolt
*RH cowl filler piece. This is the black plastic part to which the turn signal mounts. The threaded insert stripped out of mine.
*Tiger 955i head? The back left mounts for the head broke off, again from the crash bar. I may weld mine.
*Metal and plastic washers that go on the far left side of the throttle shaft assembly. My metal washer was crimped and plastic washer torn by crash.
https://picasaweb.google.com/lh/photo/_02ByEazkmkFC_n9vgW-2xqIY7z9NHplIqgZa5JC1qM?feat=directlink
https://picasaweb.google.com/lh/photo/UiKxsAhw6AC2Z6ouX_FObRqIY7z9NHplIqgZa5JC1qM?feat=directlink
Contact Baxter Cycle in Marne, Iowa.
Gus may have some of your parts. They have salvage parts.
TEL: (712) 781-2351