Did not check further, changed the bike for the car and went to my office. Any idea where to check first. Relay maybe, I notice that I don't ave any typical click sound at it. Will check tonight.
Is it just co-incidence that the flasher and the horn button are in the same switch housing? Hint...:wink:
That was also my first thought. so I checked the continuity at the harness and everything was fine. After the whole evening to try to understand that all wirings, I finaly found the guilty one in the ignition housing. hope this will help others sometimes.
(http://img810.imageshack.us/img810/4616/imag0077q.jpg)
Well done for finding it. I was expecting crud in the switch contacts. Ign switch wiring is a surprisingly common source of problems :roll:
and looking at the wiring diagram you shouldnt have had brake lights either, it seems to feed both brake switches.
For all to read:
This has been a continuing problem with Girlies since 2001...
It has happened many times.
:iagree :wink:
some steamers suffered from it too but the girlies seem to win the prize probably due to there being more of them .