Print Page - 'Steamer' Motad Venom Exhaust

Title: 'Steamer' Motad Venom Exhaust
Post by: NeilD on June 27, 2011, 04:15:53 PM

fitted to the bike and used for a couple of hundred miles. a few scratches here and there, which happened during fitment, but these could be polished out... also one of the Venom stickers has discoloured (see picture) where I squirted some carb cleaner on the silencer to clean them up! :? :)
looking for £95 .

(http://farm3.static.flickr.com/2028/5815061751_33b2b2caf1_z.jpg) (http://www.flickr.com/photos/22730494@N06/5815061751/)
DSCN0234 (http://www.flickr.com/photos/22730494@N06/5815061751/) by GUZZINEIL (http://www.flickr.com/people/22730494@N06/), on Flickr

(http://farm6.static.flickr.com/5026/5815633902_e8f6319830_z.jpg) (http://www.flickr.com/photos/22730494@N06/5815633902/)
DSCN0235 (http://www.flickr.com/photos/22730494@N06/5815633902/) by GUZZINEIL (http://www.flickr.com/people/22730494@N06/), on Flickr

Title:
Post by: NeilD on July 02, 2011, 10:04:01 AM

anyone???

Title:
Post by: Jaythro on July 02, 2011, 10:17:03 AM

pm Sin-tiger in case he wants it on my old steamer?

Title:
Post by: NeilD on July 02, 2011, 07:41:26 PM

looks like we have a lucky winner.. :D

Title:
Post by: Jaythro on July 03, 2011, 01:16:46 PM

Do Tell LOL ???

Title:
Post by: Sin_Tiger on July 04, 2011, 03:10:23 AM

Please say it aint so. :( I just spotted this. I bought a set from them, went to fit them yesterday and I think they sent me the wrong se :cry:

Title:
Post by: NeilD on July 04, 2011, 11:29:45 AM

sorry 'Sin' someone else got in before I PM'd you.. are you having trouble tightening up the ink pipes? but you can have the ventura rack!

Title:
Post by: Sin_Tiger on July 06, 2011, 08:59:09 AM

Not sure what I ended up with. :roll: The cans protrude about 100mm past the number plate and touch the indicators, definately not right.

Title:
Post by: NeilD on July 06, 2011, 02:11:49 PM

yep I had the same problem on initially trying to get mine to fit.. took a while but I think I ended up with a longer mounting bolt a couple of thick washers... also had to cut slots in the linkpipe where it joins the original to get it to tighten up anywhere near enough...

Title:
Post by: Geoff W on July 06, 2011, 07:56:04 PM

Hello Sin,
I had the same problem with my Motads, I had a Number plate made up turned through 90 degrees. Works a treat and looks fairly distinctive.

PS Givi plate fits a treat, thanks Neil.

Title:
Post by: metalguru on July 06, 2011, 09:49:22 PM

Had the same problem on my steamer and ended up shortening the link pipes.

Title:
Post by: rybes on July 06, 2011, 10:20:57 PM

mine touched the indicators too but with a lil bit of fiddlin with the brackets it misses. still bloody close tho

Title:
Post by: Sin_Tiger on July 13, 2011, 12:28:56 PM

Maybe "it's a design feature Sir" :roll:

TigerTriple.com

Marketplace => trash can => Topic started by: NeilD on June 27, 2011, 04:15:53 PM