Rear Footpegs Lowerer Plates

[Tiger Tito]

Hi guys there,

This weekend I designed and had ordered and manufactured a set of lowerer plates for the rear footpegs mounts and I want to share it with you.

[Harry]

I like!
I reckon my brother should be able to knock a pair of those up for me.
From the photos it looks like the pegs are not only lowered by 60mm, but shifted back about 30mm as well. Are they? Does this help or hinder the comfort at all for the pillion?

[Tiger Tito]

Hi Harry,
You are right, the new position not only lowers the pegs but shifts them back about 21 mm from original position.
I redisigned a new set last night that I'm going to get machined tomorrow that lower pegs 62 mm and shift them front 15 mm. I will ride them with my pillion and test results and compare with previous version.
You can take a look at attached PDF

[tazshido]

I actually need to go the other direction so my six year old son can ride with me. It is an interesting concept. I'll have to look into making/having made a set to raise the pags and still keep his right foot off that pipe.