Plug I.D. under tank

[Bigyam]

Hi  all, can anyone I.D. these plugs and what they are for i recently did the fuel connector mod so i can now give her a service , and found these 3 plugs unused ?? any help would be appreciated, The bike is running good & i can't see anywhere that they might plug to , was there any optional extra's that could be fitted etc thanks

[Timbox2]

Top one is Im sure the connector that is only used on certain US models with Carbon cannister system.

Bottom 2 look like charging circuit plugs, has somebody done a sasquatch mod?  Forget that, not sure now

PS: The corrugated Idle stepper hose in first picture looks to be in trouble? Plays havoc with the idle if any of those 3 hoses are split/collapsed

[HockleyBoy]

Pretty sure Tim was right fist time and the bottom two are the charging circuit

[AndyT]

I have my tank off at the moment and these are where my charging circuit wires to and from the reg/rectifer unit plugs in to the bike harness, so as has been said, if these are spare then you have the mod done on your bike. (mine is a late 955i)

[Bigyam]

Thanks guys, i will check the corrugated pipe as it does tick over quite low