Help!! (re: Centre Stand for 885i)

[John Stenhouse]

Well after fitting this today I can see why the Triumph one was a problem, the pivots are basically an M10 bolt, by comparison this Sw Motech stand is like the Forth Rail Bridge, pivots are huge and it fits really well. Only one issue and I sussed it before fitting, the fixing plates on the Triumph stand are threaded on the Sw one they're not, so four nuts are needed to complete the fitting and are not supplied.

[PeteH]

Bought my stand from Carl Rosners as suggested a while back on this site,  cost about £14 plus postage of £28...still a bargain but could use some nylock nuts on the fixing plates as the bolts do tend to slacken off with time