Center stand Instructions

[supercoupe1993]

I have aquired a factory centerstand for my 2000 TIger. I was wondering is anybody has the fitting instrctions. I could probobly look at my buddies 2006 and figure it out. I just figured if anybody had the written fitting instrctuoins, it could be a big help.

Chris
2000 Tiger
1982 BMW R100RS

[rex007can]

http://www.bikebandit.com/oem-parts/2001-triumph-tiger-955i/o/m21193#sch567487

[John Stenhouse]

Yep, them's the ones, take off your brake pedal, that's the allen bolt used as the pivot, then the footpeg brackets. Reattach with the centre stand brackets inside the frame behind using  longer bolts, that is what you need to check, did it come with some longer bolts, if it didn't you will need some.

[supercoupe1993]

Ok, got it mostly fitted. However im missing one of the pins. Part number 6 on the diagram. It shows needing 4 of them and i only have 3. hte Dealer and Bikebandit say that they are obsolete. Any ideas?

Chris
2000 Tiger
2006 Tiger

[Mustang]

Ok, got it mostly fitted. However im missing one of the pins. Part number 6 on the diagram. It shows needing 4 of them and i only have 3. hte Dealer and Bikebandit say that they are obsolete. Any ideas?

Chris
2000 Tiger
2006 Tiger

find a machine shop and have them duplicate one of the ones you have ......................easy peasy

[John Stenhouse]

Pm me your sddress I think I have one on the windowsill downstairs, are the three you have about an inch long half threaded?