Decent engine shop needed - UK

[akendall1966]

Help!!!

Need a recommendation of a decent engine shop that could skim and line hone the camshaft bearings on a DRZ 400 (single) head.

Sadly some Muppet had over torqued the bolts on one side and left the others finger tight resulting in some scoring from a probable seizure at some stage.

Hopefully getting it honed is more economic than taking a chance on a  unknown head from EBAY.

[Bixxer Bob]

Suggest ringing Paul, the owner of UFO Motorcycles in Huntingdon and ask who he uses. Make sure you get Paul as he's quite helpful, not one of the staff.  If I think of anything else I,ll let you know.[/list]

[John Stenhouse]

Rob Walker engineering, unfortunately they are over this side of the country near Witney. 01993 868683 if that helps.

[akendall1966]

Thanks John - They came up on a google search and looked capable, so goo to know there worth asking. Whitney isn't to far and a resonable excuse for a ride over.

AK

[Bixxer Bob]

Just to be clear, they don't do the work themselves, they outsource.  But Paul will be using whomever is the best local firm.