Elevating the front fender....

[Ironhorse]

So I disassembled the front fender and developed a solution to get it higher. And this means I need to know how high I can go without clearance problems. Any experience on this?

Thanks, Joe

[jwray76]

Stock fender/brake set up will be limited by the brake line running across the top of the fender. If you want to go higher you need to run 2 seperate brake lines from the master cylinder. If you decide to go that route you can search around and find some info.

FWIW I am running a dirtbike fender that is mounted to the under side of the triple tree.