ignition pick up coil

[windscreenman1]

may be a silly question but which is best gill or pvl can get either but which one is best
thanks

[Mustang]

pvl

[windscreenman1]

thanks mustang you are the font of all wisdom what would we all do without you !!! 

[windscreenman1]

Need some help as usual does any one know what size torx bolts are that hold pick up in place?
I have tried a 30 but it seems too slack as I don't want to knack the heads thought I better ask as a 40 is too big and I ain't got a 35  got 2 torx sets complete thanks
Mark

[Mustang]

it's a T-30

[windscreenman1]

Thanks mustang tried a t30 and it was slack in bolt head so I assume  that both bolts have been replaced with  t35 s
I've got 3 different t30 s and they are all slack I'm finding it difficult to find a t 35 locally may have to mail order one and some new bolts  as these are obviously incorrect thanks for the info mustang
Cheers
Mark

[Bixxer Bob]

If Mustang says it's a T30 then that's what it is.  Maybe the head is worn and all you need is a new bolt?

[windscreenman1]

Yes bob I'm sure your right I would take mustang word for it they must have been changed out for t 35 s as I managed to get one today and it fit like s glove, But will be ordering a fresh pair of bolt to put back to o, e spec
Cheers
Mark

[rybes]

change em all to allen headed bolts windscreen. makes life so much easier. evey bolt on mine is now allen heads so with the addition of a set of keys and a 17 and 19mm spanner under my seat, i can strip the bike down at the side of the road if i had to