Where to buy the metal fuel fittings in the UK?

[Marc]

EvilBetty wrote:
In trying to save a little money, I dug and found a company that sells individual Colder (CPC) fittings to the public, QuickCouplings.net.

Where can I buy these female ones in the UK?
I suppose it'll be faster to Belgium then from the US.

[iansoady]

Omega do them although ISTR I actually got mine somewhere else......

[Marc]

Thanks!  This will do, but rather expensive I think.

[Chris Canning]

Tom Parker

Either Preston or Hampshire

http://www.tom-parker.co.uk/

[iansoady]

Yes, I think that was where I got mine.

[Chris Canning]

I've never forgotten phoning!!,as soon as I mentioned what I wanted 'oh you've got a Triumph Tiger have you'

[trophydave]

Mine came from Tom Parker.

[Marc]

Just ordered the stuff from Tom Parker   

Thanks!

[tigergotcha]

part #? 

[Marc]

http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=2&level2=164&products_groups=8150&products_subgroups=8150A

2 x CHROME PLATE BRASS COUPLING 1/4"BSPT MALE SHUT-OFF VITON:    cLCD100040V

1 x CHROME PLATE BRASS INSERT  1/4" ID TUBE SHUT-OFF VITON:   cLCD230-04V

1 x CHROME PLATE BRASS INSERT  3/8" ID TUBE SHUT-OFF VITON:   cLCD230-06V

See also this thread
http://tigertriple.com/forum/index.php/topic,5670

Succes!

[tigergotcha]

http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=2&level2=164&products_groups=8150&products_subgroups=8150A

2 x CHROME PLATE BRASS COUPLING 1/4"BSPT MALE SHUT-OFF VITON:    cLCD100040V

1 x CHROME PLATE BRASS INSERT  1/4" ID TUBE SHUT-OFF VITON:   cLCD230-04V

1 x CHROME PLATE BRASS INSERT  3/8" ID TUBE SHUT-OFF VITON:   cLCD230-06V

See also this thread
http://tigertriple.com/forum/index.php/topic,5670

Succes!

Thanks Marc
What about  8mm barbed brass elbow fittings to replace plastic ones (expansion tank)?
I cannot find elbows, only straight or three way... do they sell them?  (it should be 5/16")
http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=7&level2=90&products_groups=3503&products_subgroups=3503B
Other sources in the EU?
Thanks

[iansoady]

Somebody else was struggling to find these. Why not get a T piece and fill the redundant arm with solder / silicone? (trimming if necessary)

[Chris Canning]

Metalguru is your man,he got his from Canada(I think!)

There you go.

http://www.tigertriple.com/forum/index.php/topic,12043.msg88287.html#msg88287