wtb: high fender kit for a Girly

[cba191]

Anyone have one?  Or recommend anything the works without a lot of fabrication?

[swappy]

Hi you can make a high fender kit without  too much fabrication, there are a couple of posts on here by people who have made there own, I think "Sasquatch"  used to sell them ages ago. I followed their designs and made one all you have to make a mudguard brace from aluminium, mount it with some spacers to the two threaded holes underneath the bottom yolk. Then  I bought a KTM enduro mudguard and drilled and bolted it to the brace. You will have to alter the brake lines though.

[cba191]

What do you use to cut the aluminum?

the brake lines aren't a big deal. I need to bleed them anyways. New ones aren't much more trouble.

[Mustang]

jig saw for home use works , use at least an 18 tpi blade

honda crf fenders work better

"stretch" is who used to make the kit for like 200 bucks
had a crf fender
2 new brake hoses
the bracket
and nuts and bolts
he doesn't do them any more .

[swappy]

I used a 4inch angle grinder with a thin metal cutting blade then just cleaned the edges up with a file and some emery paper, the aluminium was about 2.5mm thick.

[Sin_Tiger]

Aeronca is your expert here, he was kind enough to send me a very nice kit and probably still has all the info. Do a search with his name on high fender.