Forks

[kennyjd]

Hello, can anyone tell me how far the forks are pulled through the top yoke from the Factory setting?. regards Kenny.

[Timbox2]

Factory setting is top of tube inline with top of yoke (Fork top cap just above)

Sorry, might have made that up for the Steamer as I was thinking Girly, also as below, not sure if you mean factory setting or not.

[JayDub]

from the Factory setting

Or did you mean you want to lower the front after lowering the rear? mine are good at 15mm.

[kennyjd]

Factory Setting please??

[Nick Calne]

Factory setting = flush with just the cap above
General accepted better way preferred by most here = 10mm or so through.

[kennyjd]

Thanks to everyone who replied, regards Kenny.

[Sin_Tiger]

Stock arrangement.

[kennyjd]

Thanks for that,