Healdight relay

[Adamz]

So im doing some elctrical work on my 96 steamer during the rebuild into a scrambler type machine.

Ive bought a new single headlight and re-ran the electric in the same way as with the original two headlights.
Problem....

My low beam is on constantly unleds i kill the lighting on the right hand controls. Even whith the key turned and taken out.

Went to look at the wiring diagram, it says i have two headlight relays (one i surrounded by ------). I ony have one headlight relay irl that i can find. Cant for the life of me figure out where the other one would be and even if i found it, it's not connected to the original headlight wiring.

Tried just connecting the Old headlights and still the same. Loe beam is on constantly.

Am I an idiot?

[JayDub]

Have you tried a different relay?  mine did the same and when I opened it, it was corroded inside. both relays are usually behind the dash/cockpit... unless someone has been there before you - with wire cutters.

[Adamz]

Havent tried a different one but it looks fine inside.
My big confusion is that I ony have one relay but the wiring diagram says i should have two.
Anyone have any pictures of how your steamer  look withe the relay setup?
Cheers

[Adamz]

Went yolo on the Eiring and redrew all the cables from the relay. Now it works but I dont know what was wrong in the first place