2006 Valve shims

[ipollen]

In readiness for me collecting my 2006 bike on Tuesday  :D  I collected the Triumph service manual today for some bedtime reading.



I was surprised to read in the manual that the valve shims are on top of the bucket and not under. I thought all new 955 engines had gone to under bucket shims. I just wanted to check in case the dealer had ordered me the wrong manual.



Cheers, Ian

[ArizonaKid]

The 955 motor is of the "shim over bucket" design.  Don't know about the older steamers or the new 1050. . .

[BR]

The Steamers are shim-over-bucket as well.  I'd predict the newest Tiger is the same as well.  None of our bikes rev high enough to warrent having the shim under the bucket.  Be thankfull as it's a PITA to change those anyway (gotta pull cams...).



BR

'98 BRG Tiger

San Jose, CA

[ipollen]

Thanks for the info guys.



I know the last ST, Speed Tripple and Daytona 955 engines were all shim under bucket but I was not sure about the 2006 Tiger.



Good news as it means I have the correct manual and as you say, shim under bucket is a pain when clearances need adjusting.



Ian