Tiger Parts Cross-Reference Guide

[TigerTrax]

Just a note..
When I bought my '98 Steamer...USED..
I thought... service on this will be a nightmare!

But I did get a little wise....
On the BIG Triumph Tiger board... I started printing off all the
'how too' and part numbers stuff; 3-hole punching it and placed it in a
3-ring binder categorized by 'area'  ( suspension, brakes, chain, electric, etc).

After 4 years I had a very nice library of information. When I sold my bike... I sold that binder for a reasonable price and I am certain that whoever has it now has added to it. It was better than the Triumph manual!

Trax

[Dr. Mordo]

MIRRORS

Today I found some mirrors at my local shop that were $13 each and fit perfectly.  Round mirrors though, which to me don't look as cool as the rectangular ones.

BikeMaster Part No: 60-0040

The dude at the shop said they were a "standard 10mm thread".



Edited to include photo.  -Stretch

[Chris Canning]

17-inch Wire-Spoke Wheels

For anyone who can't or won't spend Dymag money this company will lace 17" rims on your Tiger hubs,i had a pair done by them some years back and they worked fine,just wanted less hassle(i never had any) with tubeless wheels.

http://www.central-wheel.co.uk/ (http://www.central-wheel.co.uk/)

[Mustang]

Dr. Mordo
those mirrors look like an a pretty close match /  replacement for steamer mirrors

[Mustang]

1993-1998 Tiger rear wheel bearings

You need 1 of each bearing # and they can be purchased from McMaster Carr or just about any electric motor repair house

The bearing #'s are : 6204 rs , 6304 rs , 6305 rs
the rs simply means sealed bearing  .
the diff in price is extreme
Triumph gets about $30 a bearing
McMaster Carr $30 will buy all three
the McMaster Carr p/n's are
5972k45  $7.72    same as 6204 rs
5972k56   $12.03   same as 6304 rs
5972k57   $12.87    same as 6305 rs

[John Stenhouse]

Front Brake Pads, Girly Wire-Spoke Wheels

Tiger 885i brake pads are also as fitted to Honda 750 Shadows.

Found that out in France, not as many Triumph dealers as Honda ones!



I believe those will also work on... Steamers,  Front, VIN 71699+; Front and Rear All Wire-Spoke Girlies; and the Fronts of Cast-Wheel Girlies as well...    -Stretch

[TigerTrax]

Just a note...

I recently purchased one of the 955i service manuals off E-bay listed as Speed Wrench.

This is a very nice manual. It is the Triumph manual with some additional
info. What I like about it.... nice vinyl flexible covers.

At $29 delivered it's a bargain.

[paulie]

Just a note...

I recently purchased one of the 955i service manuals off E-bay listed as Speed Wrench.

This is a very nice manual. It is the Triumph manual with some additional
info. What I like about it.... nice vinyl flexible covers.

At $29 delivered it's a bargain.

I'd be interested in taking a look.. Any more for sale? A quick search didn't reveal any manuals other than the Haynes.

[TigerTrax]

Here is the link:  30 manuals available.... you just buy them.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0225344433 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=011&category=34240&sspagename=STORE%3APROMOBOX%3ANEWLIST&viewitem=&item=320225344433)

Sunday March 9 is last day for $19 sale

[Mustang]

O rings for steamer Mikuni Carbs (floats)

The part numbers are 9263K121 for the small size and 9263K137 for the large at good ole WWW.mcmastercarr.com (http://www.mcmastercarr.com)

[TigerTrax]

Here are the numbers for 2006 Triumph Tiger Front Rotors:

EBC:  Right  MD646RS  519-8004-001  about $193 Bike Bandit

         Left:   MD666LS   4085649-001   about $194 Bike Bandit
**You probably will NOT find 2006 Triumph Tiger on many 'lists' you see on the web. You have to contact them and let them find it from the mfr.


OEM: P/N  T202330     $358 for set of front rotors that are known to warp.

EBC - Stealth Products - OEM are the only ones I have found with rotors for a 2006 Tiger.

[Stretch]

**** DISCLAIMER NOTE****
These auto caps should only be used in emergency situations as they are NOT the same as the Triumph OEM cap
see pic


back to your regular programming
********edited by mustang  *************

Here's a cap that fits and works
<CLICK HERE> (http://www.tigertriple.com/forum/index.php/topic,12447.0/topicseen.html#msg91362)

Radiator Cap

The Triumph caps are prone to weakening before their time, allowing vapor and coolant to escape, resulting in an overly hot Tiger.

The Triumph caps are $19 at a dealer, IF they have one in stock.

ArizonaKid discovered that a Stant 10227 radiator cap, a replacement for 80's Toyotas (as well as 1988-91 Honda Civic), is a perfect fit for a Tiger, available at auto parts stores 'round the world.  About $7.




Edit for a new development:

The stant 10227 (replaced by the newer 11227) is only a 13 psi cap. A good replacement might be the 11233 - it's 16 PSI, which is right at the 1.1 BAR that triumph specifies.

Same dimensions, just a different main spring.

To add...

FYI:
This cap fits these cars:

ACURA   (1989 - 2005)
CHEVROLET   (1985 - 1988)
CHRYSLER   (1995 - 1999)
DODGE   (1995 - 1999)
EAGLE   (1995 - 1998)
FORD   (1989 - 2009)
GEO   (1989 - 1993)
HONDA   (1990 - 2007)
HYUNDAI   (1998 - 2008)
INFINITI   (1997 - 2007)
ISUZU   (1985 - 2004)
KIA   (2001 - 2008)
LEXUS   (1992 - 2007)
MAZDA   (1993 - 2008)
MERCURY   (1989 - 2001)
MITSUBISHI   (1995 - 2008)
NISSAN   (1990 - 2008)
SUBARU   (1999 - 2008)
SUZUKI   (2004 - 2008)
TOYOTA   (1994 - 2008)

[superfour]

FRONT WHEEL BEARINGS

Replaced my front wheel bearings, 955 spoke wheel Girly.  For reference the size is 6303 with twin rubber seals.

[Stretch]

Coolant Expansion Tube Elbows

In conversation with a fellow local Tiger rider, discoverd his elbow failed while on the road in Murphy a year ago. I wanted to affect a permanent solution.  Have found a brass fitting to replace the failure prone 90 degree elbow in the Girly's coolant recovery. I was rooting around at my local Home Depot. In the plumbing section I discovered  a Qestpex 3/8 barbed brass elbow, part # 084169484406, priced at $1.59. Works a treat and will never fail.

[the cyclops]

Word is that the FZ1 shifter rubber will fit the Tiger Girly (+ others?).  I looked at one in the showroom the other day and it looked dead on.  Part number is 5EB-18113-00-00 and I have one on order.  Don't know how my got shreaded so bad in 5K miles.
*******It works (had to cut it down just a tad********
ordered from boats.net of all places.  Total of like $5 shipped