Torque Specs?

[ThreePutt]

Is there a chart somewhere listing all the torque specs?

Specifically I'm planning on installing a set of engine guards and bar risers.  If there's no chart, would anyone know the specs?

Also, do I need to use Loctite? I'm new at working on anything mechanical, so any help would be appreciated.

Thanks!

[iansoady]

http://www.triumphrat.net/tiger-workshop/6676-torque-settings-info.html

[HappyMan]

My service manual said 80 nm for front and rear motor mounts....

[ThreePutt]

Thanks!

[curt]

Also, do I need to use Loctite? I'm new at working on anything mechanical, so any help would be appreciated.

Thanks!

Loctite is your friend. Helps you from loosing stuff on the road. The medium strength (blue color) is good for all around. The high strength (red color and feared by many) really locks it home. Don't use to much, a dab will do ya. A drop on bigger bolts.

[ThreePutt]

Also, do I need to use Loctite? I'm new at working on anything mechanical, so any help would be appreciated.

Thanks!

Loctite is your friend. Helps you from loosing stuff on the road. The medium strength (blue color) is good for all around. The high strength (red color and feared by many) really locks it home. Don't use to much, a dab will do ya. A drop on bigger bolts.

A dab, got it.  Thanks.