Carb O-Ring sizes

[Dr. Mordo]

Does anybody know what the actual sizes of the carb o-rings are?

Specifically, the one on the pilot screw, the one on the vacuum pipe, and the one below the plastic frame and above the needle jet.

I'd rather order from McMaster-Carr than give Triumph several dollars per o-ring.

I know I can tear mine apart and measure them, but I thought maybe someone had done this already.

[Stretch]

Check Mustang's post at the bottom of this page...  http://tigertriple.com/forum/viewtopic. ... c&start=20

[Dr. Mordo]

Those are just for the float o-rings, but thanks.

[Stretch]

Whups, sorry about that.

[MtheTiger]

Specifically, the one on the pilot screw, the one on the vacuum pipe, and the one below the plastic frame and above the needle jet.

I'd rather order from McMaster-Carr than give Triumph several dollars per o-ring.

I know I can tear mine apart and measure them, but I thought maybe someone had done this already.  
 

Mustang replies with the part nrs for the float orings which is grrreat.
Anyone know the sizes & where to get the other ones needed for a fair price?
My stealer wants € 54,00 for a whole set.....WTF

[Dr. Mordo]

I never found out the answers.  I finally gave up and paid the dealership $700 to rebuild the carbs.  Which wouldn't be so bad if they had done a better job...

[MtheTiger]

I never found out the answers. I finally gave up and paid the dealership $700 to rebuild the carbs. Which wouldn't be so bad if they had done a better job...

Sorry to hear that man.
$700 is bloody outrageous!

[Mustang]

MtheTiger  check your private messages...........................

[Sin_Tiger]

I came accross these UK carb specialists while browsing a Classic bike mag, they might be of some use to us, haven't tried them yet as I managed to get a bargain used set but I might play around with the old set.

NRP Carbs

JRS Carbs

[rf9rider]

I`ve contacted NRP about a rebuild kit, heres the reply.

 Hi Mark,
 Thank you for your enquiry
 Carb overhaul kit in stock at £16.00 per carb
 All o-rings/bowl seal/rubber tipped float valve
 No kit available for the fuel tap at present
 UK P+P £3.00 1st class recorded for the kits
 All prices + Vat
 We take credit/debit cards over the phone 10.30 - 6.00
 Regards
 Andy

[NeilD]

No kit available for the fuel tap at present
 

I asked them about fuel tap kits a couple of months ago, hopefully if they get enough enquiries they might be able to come up with something..  :)

[MtheTiger]

Carb overhaul kit in stock at £16.00 per carb
All o-rings/bowl seal/rubber tipped float valve

That sounds cheap !
I also found out that my dealer don't like the way Trumpet sells only the whole float assembly also and fails to comply....he sells the orings seperately  :D  And alle the other orings as well.
This weekend my carbs are getting an ultrasonic deepcleaning and after that with new orings fitted back on the bike YAY.

[rf9rider]

No kit available for the fuel tap at present
 

I asked them about fuel tap kits a couple of months ago, hopefully if they get enough enquiries they might be able to come up with something..  :)

I`m sure you posted a pic of your tap a while ago?

MIne leaks so i took it apart and theres only one o ring and the brown cone shaped thingy with the holes in, so theres not a lot to it.

I`m currently trying to find an alternative, just trying to find one with the same mounting holes.

[MtheTiger]

Rf9rider

My tap also leaks. A new one will cost € 126,00 so defenitely not cheap for this few parts. If you have any success with an alternative that would be nice...

[Mustang]

pingel makes an adapter plate for the steamer so you can use an 3/8ths npt threaded petcock

it's 25 bucks and the pingel petcock is 90 dollars so no real savings just an alternative

http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=181576&store=Main&catId=&productId=p181576&leafCatId=&mmyId=5541



http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=H18203&store=Main&catId=&productId=pH18203&leafCatId=&mmyId=5541