WTB brake side passenger peg for a STEAMER!!!!

[yoshadventure]

Hi, I'm looking for the right (brake side) pass peg for a Steamer. I bent mine and now my ladie friend complains that one peg sits lower then the other.

Please let me know what'cha got!
I have paypal
Thanks
Yosh (in Seattle WA)

[Mark II]

If you find one, or if someone has an extra one after Yosh gets his, I'm looking for one too.

[Mustang]

what part are you looking for ? If it is #26 you might want to look at the frame where it attaches . Usually thats what ends up being bent , the mounting lugs on the frame get tweaked not the actual footpeg bracket .
and if it is your footpeg hanger thats screwed a new one from bike bandit is 40 bucks

[yoshadventure]

Thanks again mustang, your always very helpfull, it is indeed the frame tab that was bent. I used a adjustable wrench and bent back into place.

"In other news", I finished my luggage rack and its at the power coating shop today. I'll post some pics on a new thread. Its a bit of a hack job but it will easliy do the trick. I will also be using huge bags (for the ladie and I): Hardigg im2700, they are 49liters each and only weigh 11lbs each!!!
Thanks agian
YOSH

[Hooligan]

Any one still looking for the right side pillion footpeg on a Steamer?

[Mark II]

Any one still looking for the right side pillion footpeg on a Steamer?

Yes, that would be me.  Also in the market for a fuel tap if you happen to have one of those around.

[Mustang]

right side pillion footpeg assembly on ebay
http://cgi.ebay.com/ebaymotors/1996-TRIUMPH-TIGER-RIGHT-REAR-PASSENGER-PEG_W0QQcmdZViewItemQQcategoryZ35611QQihZ010QQitemZ200213762156QQrdZ1QQsspagenameZWDVW