HELP, need specs for wheel spacer

[big jim]

Hey guys, I am stationed in Bahrain and my bike is my only transport. recently I had a flat tire, I had to repair it in the dark in a parking lot. Last night it felt like something was lose in the rear end. This morning I noticed that the sprocket bolts are chewing a grove in the swingarm. Upon further inspection and disassembley I found the spacer on the sprocket side is missing. I cannot wait for delivery of the $4.00 part. If I can get the measurments I can get one made. It is the spacer that goes against the swingarm on the sprocket side. The part # I got off the bikebandit site is 555739-001 does any one know if that is a triumph P/N? If it is I might be able to get a dealer to measure it for me. People from this site have came to my rescue before so thank you in advance.
Brian

[MIMbox]

Hi Brian.
Sorry to hear you have  a problem. I cannot tell you what the sizes are, but the Triumph part number in my parts list (dated Jan94) is
2012073-T0301, SPACER LH.
Hope this helps
Regards Phil

[big jim]

Thank you. My dad got a hold of cascade moto classic in portland with that part# and they were nice enough to measure it and send me a picture. I had one made for 5 Bahrain Dinar, about 12 USD, and I am back in busniess.

[aeronca]

big jim, sorry i couldnt get the specs sooner, im taking my rear off this week end for a sprocket/chain r&r, and was going to try and get the size's for you, but it sounds like your ok. good luck and stay safe over there - post some pics of that place :D     eric