Girly front pegs on a roadie ??

[rxcoop]

will they fit??  has anyone done this....grinding/filing needed ??

[ramseybella]

Not to much enthusiasm on the 1050's on this site I see.
Shame I would like to see more.

[Mustang]

will they fit??  has anyone done this....grinding/filing needed ??

they wont fit with out some serious machining and even then they won't sit right because the pin hole in the Girly pegs is .090 of an inch bigger than the roadie

want some off road style pegs for your 1050 that have a bigger foot surface and cleats ?

http://www.knlcycle.com (http://www.knlcycle.com)

[Mustang]

Not to much enthusiasm on the 1050's on this site I see.
Shame I would like to see more.

well you and evil betty need to get the roadie section hoppin .........
 :D

[ramseybella]

evil betty? :?

They do make these for the Tiger 1050>>

http://www.pivotpegz.net/ (http://www.pivotpegz.net/)

Hey Mustang!

I have one of your valve tools but I see I won't be able to use it on the 1050 bummer!!

[Mustang]

evil betty? :?

They do make these for the Tiger 1050>>

http://www.pivotpegz.net/ (http://www.pivotpegz.net/)

Hey Mustang!

I have one of your valve tools but I see I won't be able to use it on the 1050 bummer!!

no this evil betty

"EvilBetty" (http://www.tigertriple.com/forum/profile.php?mode=viewprofile&u=6299)

I got pivot pegs on my 450 honda they are ok but highly overrated and the tension on the pivot action is controlled by a rubber o ring and a lock nut (wears out and needs rebuild at least once a year )
ebay the shim tool ................it only works on triumphs but not 1050's

[ramseybella]

evil betty? :?

They do make these for the Tiger 1050>>

http://www.pivotpegz.net/ (http://www.pivotpegz.net/)

Hey Mustang!

I have one of your valve tools but I see I won't be able to use it on the 1050 bummer!!

no this evil betty

"EvilBetty" (http://www.tigertriple.com/forum/profile.php?mode=viewprofile&u=6299)

I got pivot pegs on my 450 honda they are ok but highly overrated and the tension on the pivot action is controlled by a rubber o ring and a lock nut (wears out and needs rebuild at least once a year )
ebay the shim tool ................it only works on triumphs but not 1050's

LOL!

I know the Evil Betty not Ugly Betty.
Them pegs are a bit high in price as well.

I guess I will sell my shim tool and pay the Triumph Piper my first weeks pay check at 12000 miles after I replace the tires, chain and sprockets.

I already replaced the stock can with a Leo Vince wonder what mapping was on this bike seemed a little Boggy in the mountains Sunday but then I didn't take it that high with the stock pipe to compare.