What tools will I need?

[tazshido]

OK, I always carry tools if I'm going more than 100 miles from home. It has pulled my bacon out of the fire many times and endeared me to several fellow motorcyclists who do not carry tools, one of them, an attractive young lady who was extremely gracious and generous with her gratitude. Sorry, I digress. :oops:
I'll be flying out to California to take delivery of my bike and riding it home 1300+ miles, so I'll be taking my kit. I have a small, old military canvas tool bag and it's usually pretty full. I carry;
¼ drive metric sockets
3/8 drive metric sockets
¼+3/8 drive combo stubby ratchet handle
¼ drive breaker bar with a 3/8 adapter
Fold-up style hex key (allen wrench) set
Set of 6" hex key wobble tip sockets
Open end wrenches in some common sizes for my bike
6" adjustable (crescent) wrench
Heavy duty pliers
Small inspection mirror
Magnetic tool retriever
Small ratcheting screw driver handle with long and stubby shanks
Screwdriver bits for above.
Butt splices and spade style connectors
Stripping/crimping pliers
Stainless steel safety wire
Zip ties
Gerber multi-tool
Any larger sockets needed for removal of the wheels

I have gleaned from the how-to section on this forum that I will need to now take some Torx bits also. So what else might I need that would be Girly specific. Can anybody tell me what size sockets I might need for the axle nuts? I want to be prepared because I will be on my own "swingin in the breeze".

[cosmo]

OK, I always carry tools if I'm going more than 100 miles from home. It has pulled my bacon out of the fire many times and endeared me to several fellow motorcyclists who do not carry tools, one of them, an attractive young lady who was extremely gracious and generous with her gratitude.

 

Cosmo

[tazshido]

OK, I always carry tools if I'm going more than 100 miles from home. It has pulled my bacon out of the fire many times and endeared me to several fellow motorcyclists who do not carry tools, one of them, an attractive young lady who was extremely gracious and generous with her gratitude.

 

Cosmo

Sorry, That was back in my single days when I did not carry a camera. I didn't expect to live long enough to need a photo album of memories. Two wives, two kids and a dozen bikes later and I'm very sad to not have photos of some of those moments.

[macgart]

Depending on what year Girly you get, you'll need a couple of large hex wrenches for adjustment of the eccentrics.  I don't remember the exact size, the large one came in the bike tool kit.  

I also carry some tire irons (not that I'd have a lot of luck actually changing a tire on the side of the road) and a 12v air compressor.

You can get pretty far into the bike with surprisingly few tools.  I carry a set of torx sockets and a set of hex sockets in 1/4 and 3/8 drive along with a variety of extensions.  You need a long torx to get to the bolts in the battery box, and bottom mount of the gas tank.  You'll also need a long (5mm?) hex to get to the front bolt of the tank as well as a really short one for the sides of the tank.  So, sockets with extensions cover the bill nicely.  

A bit of thread lock is never a bad idea as well.  If you've not had one before, you'll find that the Girly is pretty easy to wrench on.

I'm about 2 hours south of you, shoot me a pm some time and we can hook up.  Maybe around Centennial?  There's some pretty cool riding around there.

[2004Tiger]

A small digital multimeter. $10 or less.
Tire presssure gauge.
Knife.
Gorilla tape.

[cbxtc6]

Don't forget a tire repair(plugger) kit!
Here's the kit I brought on my 11,000 mile trip on the Tiger:

[KuzzinKenny]

Hey tazshido !! i checked back yer posts to see its a 2006 Tigger ( it helps to add it to yer profile ) the main thing you`ll need is a sheepskin seat pad  :shock:  unless yer one O these Iron Butt lot  

enjoy the ride !!

KK

ps dont forget chain lube and some topup engine oil !!

[KuzzinKenny]

Don't forget a tire repair(plugger) kit!
Here's the kit I brought on my 11,000 mile trip on the Tiger:

Hey cbxtc6 !! i`m interested to know where the ES spotlight bulb fits ??

 :lol:

KK

[cbxtc6]

Yeah, my workbench is a bit cluttery...

[tazshido]

Don't forget a tire repair(plugger) kit!
Here's the kit I brought on my 11,000 mile trip on the Tiger:

I think the beer glass is an especially nice addition, at least for the home kit eh?

[tazshido]

I'm about 2 hours south of you, shoot me a pm some time and we can hook up.  Maybe around Centennial?  There's some pretty cool riding around there.

I do quite a bit of riding around that area and I have a riding buddy who lives in CO Springs. I love the CO and WY Rockies for riding and now, with a 2006 Girley, I'm no longer stuck on the paved roads.