Mirror mounts

[rf9rider]

I`m thinking of changing the front brake master cylinder to a 5/8ths to get the most out of the Alcon 6 pots i`m going to use on my front end conversion, but as the mirror mounts are part of the Steamer master cyl, was wondering if there are independant mirror mounts i could use?

[Tomas03]

Sorry this may not be what you are asking for and may add more questions, but I was thinking of changing the master on my steamer with standard brakes to a radial master with remote reservoir and saw these

http://cgi.ebay.com/ebaymotors/ws/eBayI ... K:MEWAX:IT (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270604905613&viewitem=&sspagename=STRK:MEWAX:IT)

Then doing some research I found this blog

http://www.adrianmolloy.com/Brakes.html (http://www.adrianmolloy.com/Brakes.html)

It would seem from the blog that 1050 brakes (he states kwaka's that use 6 pots have good masters and that 1050's use a simalar set up) are good for 6 pot brakes and they have the mount on them from what I can see in the ebay ad.

[rf9rider]

Thats the sort of thing i`m after.
Although reading his blog, he`s changed his 1050 master cyl for the Kawasaki one as it works better with the 6 pots being a 5/8ths bore.

[rybes]

is this any good to ya ?

http://cgi.ebay.co.uk/MOTORCYCLE-HANDLE ... ycle_Parts (http://cgi.ebay.co.uk/MOTORCYCLE-HANDLEBAR-MIRROR-MOUNT-BLK-BARS-ACCESSORIES-/330419948938?pt=UK_Motorcycle_Parts)

[rf9rider]

Thanks Mr Rybes, thats the sort of thing.

Now only if i knew if the steamer mirrors have a 10mm thread........... :lol:

[rybes]

yes they do have a 10mm thread :D

[rf9rider]

Cheers, sorted.  :)

Now to find a 5/8th master cyl.