Thunderbike Engine Bar Help

[R0B]

Please could someone give me a clue as to the front LHS engine bar bolt. It's driving me totally nuts trying to work out how to install it...............everything is in the way!!

Rob

[Mustang]

the bolts that go on the bottom up into the engine block ?????

Ball end allen wrench and allen head bolts , and lot's of patience

[R0B]

Thanks for that, got the bolts, and life is good again.........top tip :-)

Rob

[cdubya]

While we are on the topic...
Just purchased a Girly.  Sweet!
Noticed a couple of oil leaks.  Figured, aw, just a gasket or something.  No worries, I'll fix 'er up when I get 'er home.
Upon further inspection, the oil is coming from the lower bolt holes of the engine case.  Crazy!  Looks like the bars weren't installed properly.  No washers to shim the bars up to the engine case and no silicone rtv.  Looks to me like without the washers, the lower crash bar mounting plate cannot mount flush with the case to pull evenly and to seal properly.
Any one else see this and have any advice?  The bars are bomber and quite handy but oil leaking from both sides is no bueno.
Thanks.