News:

Welcome to the TigerTriple forum! Over the years we have gathered lots of great information on all things Triumph Tiger. Besides that, this is a great community that is willing to help you keep your Tiger moving. So, feel welcome! Also, try the search button for answers to your questions. If you have any questions, PM me on ghulst.

Main Menu

'Steamer' Motad Venom Exhaust

Started by NeilD, June 27, 2011, 04:15:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

NeilD

June 27, 2011, 04:15:53 PM
fitted to the bike and used for a couple of hundred miles. a few scratches here and there, which happened during fitment, but these could be polished out...  also one of the Venom stickers has discoloured (see picture) where I squirted some carb cleaner on the silencer to clean them up!  :?  :)
looking for £95 .


DSCN0234 by GUZZINEIL, on Flickr


DSCN0235 by GUZZINEIL, on Flickr

NeilD

#1
July 02, 2011, 10:04:01 AM
anyone???

Jaythro

#2
July 02, 2011, 10:17:03 AM
pm Sin-tiger in case he wants it on my old steamer?

NeilD

#3
July 02, 2011, 07:41:26 PM
looks like we have a lucky winner..  :D

Jaythro

#4
July 03, 2011, 01:16:46 PM
Do Tell LOL ???

Sin_Tiger

#5
July 04, 2011, 03:10:23 AM
Please say it aint so.  :(  I just spotted this. I bought a set from them, went to fit them yesterday and I think they sent me the wrong se  :cry:
I used to have long hair, took acid and went to hip joints. Now I long for hair, take antacid and need a new hip joint

NeilD

#6
July 04, 2011, 11:29:45 AM
sorry 'Sin' someone else got in before I PM'd you.. are you having trouble tightening up the ink pipes?  but you can have the ventura rack!

Sin_Tiger

#7
July 06, 2011, 08:59:09 AM
Not sure what I ended up with.  :roll:  The cans protrude about 100mm past the number plate and touch the indicators, definately not right.
I used to have long hair, took acid and went to hip joints. Now I long for hair, take antacid and need a new hip joint

NeilD

#8
July 06, 2011, 02:11:49 PM
yep I had the same problem on initially trying to get mine to fit.. took a while but I think I ended up with a longer mounting bolt a couple of thick washers... also had to cut slots in the linkpipe where it joins the original to get it to tighten up anywhere near enough...

Geoff W

#9
July 06, 2011, 07:56:04 PM
Hello Sin,
                I had the same problem with my Motads, I had a Number plate made up turned through 90 degrees. Works a treat and looks fairly distinctive.

PS Givi plate fits a treat, thanks Neil.
It\'s ok , this will only take 5 minutes.
96 Pimento Red Steamer.

metalguru

#10
July 06, 2011, 09:49:22 PM
Had the same problem on my steamer and ended up shortening the link pipes.
2013 Explorer
2006 Rocket 3
2004 Tiger Lucifer Orange
2001 Adventurer. (Like new).
1993 DR200
1977 Kawa Z1000A1 (Had from new)
1972 BSA A65L
1960 Norman Nippy
1952 Royal Enfield Ensign MK1
2 Crossers
I may as well do it, as I'm gonna get blamed for it anyway.

rybes

#11
July 06, 2011, 10:20:57 PM
mine touched the indicators too but with a lil bit of fiddlin with the brackets it misses. still bloody close tho
reiberman reiberman rides his tiger as hard as he can (sung to spiderman tune)

Sin_Tiger

#12
July 13, 2011, 12:28:56 PM
Maybe "it's a design feature Sir"  :roll:
I used to have long hair, took acid and went to hip joints. Now I long for hair, take antacid and need a new hip joint
Print
Go Up Pages1
User actions