exhaust guard

[daveb]

washing the bike today and noticed the exhaust guard was loose, the screw on the underside had worn a large hole in the aluminium guard.

sorted it with a washer. Perhaps over xmas i should see about replacing it.

anyone else come across this problem....er....er.... i mean an opportuniuty to fit a modified sump guard.

your kidding me, a new one is £230 wtf item 22
 http://www.worldoftriumph.com/triumph_m ... _03=232917

[jphish]

Holy moley! They gotta be kiddin !! Is that 222 a misprint ? should be 22 perhaps?

[jphish]

OOPs - meant 229.

[daveb]

I know i was shocked i rounded it up from 229 to 230  :D , for a few quid more I could get a touratech sump guard

http://www.touratech.com/shops/008/prod ... 093342af95

but would need mods for the main stand

[PeteH]

My Tigger came with guard and bracket removed, but all three holes had been rattled bigger, I eventually got around to sorting it and managed to get a U bolt on the center pipe and hang the bracket of it.
I then drilled the holes out to get them round ish then got one the fitters to turn me down some ally bar that was a snug fit in the holes but with a flange to act like the washer if that makes sense?
Nothings moved since fitting :D
If you have trouble sorting it let me know and I`ll have a word

[daveb]

cheers Pete, i am thinking of desiging a new one which will also be a suo guard, but must fit with the engine bars.

They guy i done the welding masks for is a welder  :D  plus my brother in law.