Keyless gas cap

[Mustang]

i've done both ways ..............twin longer cables is the easiest !

[HeavyHustler]

i've done both ways ..............twin longer cables is the easiest !

Thanks again!

[rf9rider]

With the Trophy lowers and Tiger stanchions, i had 2 longer, braided, colour coded cables made up.

I fitted the Acerbis fender to my first Steamer with oem forks, if i remember rightly, i had to slightly twist the brake union fitting and used the original lines.

[HeavyHustler]

Thanks again for your help lads.  Any chance either of you have close-up pics of your fenders mounted and/or the mounting bracket you had made?
Cheers,
Mark

[HeavyHustler]

Just rehashing the fender bracket!  Anyone have some close-ups of the mount/bracket? 

[rf9rider]

Heres a couple for you, the spacers go between the fender bracket  and the bottom tree

[HeavyHustler]

From what I gather the two outer holes are the ones with the spacers that mount to the lower tree?  How thick are the spacers?
The rest of the holes then mount to the fender, correct?
Cheers!

[rf9rider]

Yup, correct.

The spacers are roughly 1 inch tall if i remember rightly.

If you send Aeronca a message, he`ll be able to tell you as he made everything for me.

[HeavyHustler]

Well I received my quality fender bracket from Aeronca today!  Had to make a few changes and bends to fit the Acerbis fender but it all worked out great!!!   

[Sin_Tiger]