pruned from steamers or /what size is my tool ?

[ssevy]

Just read in the new MCN that Motion Pro is now offering JIS bits for screwdriver handles. Should be easier to find (and less $) than the Vessel screwdrivers.

[iansoady]

here: https://www.dirtbikexpress.co.uk/workshop__and__tools/motocross_tools/motocross_t-handle_tools/motion_pro_t-handle_bit_driver_with_phillips_bits (https://www.dirtbikexpress.co.uk/workshop__and__tools/motocross_tools/motocross_t-handle_tools/motion_pro_t-handle_bit_driver_with_phillips_bits).

I must admit I was never fully aware of the difference between JIS and Phillips till this thread but always wondered why the latter drivers never seemed to fit properly.

[JayDub]

So, if we have Philips and JIS, - where does Pozidrive come into it? what is the physical difference between JIS & Philips (and JIS & Pozidrive come to that) 

[ram33]

https://en.wikipedia.org/wiki/List_of_screw_drives#JIS_B_1012

[iansoady]

Pozidriv drivers definitely ruin JIS screws.........

[JayDub]

I've never heard of 'JIS'... yet it seems I must have been using them for the last 35+ yrs  but then I always make sure a screwdriver is a solid tight fit before putting any pressure on.  I usually learn from my mistakes 
Any chew-ups are mostly caused when its been over-tightened and/or a lack of copper grease.

[JoeDirt]

I've never heard of 'JIS'... yet it seems I must have been using them for the last 35+ yrs  but then I always make sure a screwdriver is a solid tight fit before putting any pressure on.  I usually learn from my mistakes 
Any chew-ups are mostly caused when its been over-tightened and/or a lack of copper grease.

JIS - Japanese Industry Standard

Yea, the Japanese even made the our stock brakes. They obviously went down a different path than the IFI (International Fastener Institute). I will give them one thing they look like the JIS ones have a better 'bite'.



I'll take a HEX or Torx over Phillips head any day.

[iansoady]

Just ordered some of these: http://www.onlyqualitytools.com/catalog/Vessel/Double-Ended_Power_Bits.html (http://www.onlyqualitytools.com/catalog/Vessel/Double-Ended_Power_Bits.html) which are a lot cheaper than the full screwdrivers. They are said to be dual JIS / Phillips so assume they are the former as they will also fit the latter according to the Vessel website.

That tool place is unusual in charging low carriage so have bookmarked it for the future. We'll see what the bits are like when they arrive......

[nickjtc]

I'll take a HEX or Torx over Phillips head any day.

[Nick Calne]

Why did Triumph use a screwdriver type fixing in the first place? And why torx too? Surely cheaper easier simpler for all to go hex throughout? Also why so many materials and styles on a typical bike?

[JoeDirt]

Why did Triumph use a screwdriver type fixing in the first place? And why torx too? Surely cheaper easier simpler for all to go hex throughout? Also why so many materials and styles on a typical bike?

I have worked in companies that use a lot of fasteners. I have even spec'ed out new screws and what-not. The thinking always is... if it isn't broke don't fix it. It is easy to "grandfather" things out of a company over time without applying resources/time/money to change all of their fasteners to the latest style. Triumph in this case has been around for a long time and almost wasn't around in the 70's. I hope and like to think, it has to with spending engineering resources on new bikes instead of these "service issues". I say service issues, because the engineers and the managers see it such.

Just my opinion.

[JayDub]

I spose its just to steer the half hearted DIY'ers toward the dealers Nick.

[motoOzarks]

This thread needs some nuts

[John Stenhouse]

Why? They seem to be screwing it up nicely without. 

[iansoady]

Triumph in this case has been around for a long time and almost wasn't around in the 70's. I hope and like to think, it has to with spending engineering resources on new bikes instead of these "service issues". I say service issues, because the engineers and the managers see it such.

Just my opinion.

But the current Triumph has nothing in common with the Meriden company other than the name. All the bikes have been designed from the ground up in the last 20 years or so.